Double Action Airbrush To use a double action airbrush, it requires user input on a two-direction trigger to manipulate the air and paint flow separately. 1. Press Down For Air […]
Airbrush Makeup History
When we hear the word “airbrush” we often associate it with cosmetic makeups. It is also often referenced to movie and magazine cover shoots. But did you know that an […]
Airbrushing “assemble and disassemble” SP180/SP136/SP16/18-0010/18-0009
Airbrush Gun are used to apply professional makeup for theatrical performances and photography. They are designed to easily assemble and disassemble for cleaning. Most airbrush guns can be assembled in just five steps.
Hold the handle portion of the makeup airbrush in your hand and slide the trigger into the open slot on the top of the handle. Make sure that the trigger lines up with the interior spring. It should glide in without much force.
Drop the rocker into the back end of the handle carefully and slide the spring that comes with it over it. In some airbrushes the rocker and spring are connected; in other cases they are separate components.
Take the collar of the airbrush and tighten it into place, then slide the lug nut on. Leave it a bit loose so adjustments can be made. Slide in the needle so that it comes out the other end of the handle.
Tighten the lug nut onto the end and move to the front of the airbrush. Take the cone tip (the small tip) and tighten it on around the needle. Slide the head over the tip and secure it using the provided wrench. A small universal wrench will work as well.
Slide the casing onto the back of the gun and tighten it. Each gun will tighten differently. Some simply snap into place while others need to be tightened with a wrench. Check the manufacturer’s instructions on this part.
Connect the air supply to the gun and use a test paper to check that the gun is functioning. You can use a paper or your hand to check the air supply. Simply hold the trigger for the air supply to test the gun. If it is functioning, simply place the head cap over the tip of the gun to protect the tip until you need to use the gun.
How to choose the correct Airbrush for your needs
Choosing the Right Airbrush
There are so many choices in features and configurations… Gravity feed, siphon feed, side feed. External mix, internal mix. Dual action, single action, trigger action.
Consult the Airbrush Dictionary if you’re dying to find out what all those terms mean, or just keep reading.
Then you have to take into consideration the different manufacturers out there.
Actually it’s easy…
Choose a gravity feed, dual action, internal mix airbrush from a name brand manufacturer.
If you use a one airbrush per color, or one bottle per color setup, choose a siphon feed instead of the gravity feed.
My Experience with Airbrush Makeup
Traditional foundation makeup leaves brush marks on the skin that is why women turned to airbrush makeup kits as an alternative. This new beauty innovation provides not only superior coverage but a nice feeling, new look, and ageless appearance. Simply put, no more fine lines, acne marks and the signs of old age is eradicated by this makeup technology.
The airbrush system can settle up to 12 hours maximum depending on the brand, expertise in application and quality of makeup used. Therefore, you don’t have to worry about retouching and crease formations that you experience when using cake foundations; no more oily faces when using liquid foundations.
This worry and maintenance-free method is well-loved by any, most especially those who have a busy lifestyle. Some women complained of having a hard time going back and forth the restroom to retouch.
Airbrush systems answer so many issues that women have all these years. With just a few minutes of application and a little bit of extra money to add to the makeup budget, the woman of today is empowered to live a good life.
Here is the code to get the airbrush which is 30%off
Best Video for Airbrush Disassemble and Deep Clean SP180/SP136/SP16/18-0010/18-0009
Most of beginner airbrushing woes were the result of two things, the improper care and cleaning of the equipment, and not being able to reassemble a gun once I had taken it apart. I hope it helps others to avoid the frustration of my early airbrushing days.
Deep cleaning your airbrush after each job is recommended to prevent problems associated with clogging.
STEP 1: Disassemble your airbrush according to your airbrush model’s specifications.
STEP 2: Soak nozzle cap, nozzle, needle cap, and body in 99% Isopropyl Alcohol.
STEP 3: Wipe needle clean with 99% Isopropyl Alcohol.
STEP 4: Assemble airbrush according to the airbrush model’s specifications.
How to make a unique colorful Airbrush T-shirt
Airbrush t-shirt designs are custom painted and personalized with any names, words and colors you would like.You can design one by yourself.
Airbrush Colors are the most widely used and trusted professional airbrush paint in the world.These are ready to use professional grade airbrush colors which are manufactured with the highest quality control standards.Made with light-fast pigments, durable resins and quality ingredients, airbrush works on fabric, wood, leather, canvas, plastics, aluminum, metals, ceramic, clay, poster board, brick, plaster, latex, glass and more.
The most commonly used airbrush for airbrushing T Shirts is the siphon feed airbrush which handles the higher viscosity textile paints tend to be very well. Be sure to buy the correct hose for the airbrush you buy.
How to fix a airbrush compressor don’t work problem sp16
Lots of the compressor don’t work problem happens because of the loose connection of the cable.
Since the product is shipped from China, some of them may be loose because of the shipment.
Here is a video shows how to reconnect the cable of the compressor.
Pinkiou Airbrush makeup – not just for movie stars
You’ve seen it used on TV and in movies, but did you know that airbrush makeup is gaining popularity in home use as well? First used in the movies in […]
HOW TO USE YOUR AIRBRUSH
☞Pinkiou airbrush☜ Stept 1: Attach the gun to compressor hose. SP-35 – metal screw-on connector SP-40 – metal screw-on connector with conical base attachment (optional) Stept 2: Drop makeup into […]