Share Your Experience - Pinkiou- A Airbrush Makeup Permanent Microblading Brow Brand

03/21/201712/10/2021

How to clean a airbrush SP16

I want to share with you how to properly clean your airbrush gun so it will work like new for a long time. If you want to know how to use the Pinkiou airbrush gun, click here.

Purge Your Airbrush Gun:NEVER USE HOT WATER on your airbrush gun because, there are plastic gaskets that can be warped and destroy your gun. Use warm water.
cup is where you add the airbrush color. It needs to be cleaned when you are done using it. So add some warm water to and dump it out into a trash can or a cup of water or the sink. Add a little more water and dump it out.

Drained the remaining paint inside the airbrush cup.
Put some water into the cup, Pull and release the trigger several times to force particles out
of the needle and end cap. If you water turns colors, you will need to get fresh water and
continue to rinse.
When you add fresh water to the cup. Then, put your finger over the needle cap and pull the
trigger to make the air flow backward into the gun to remove any left color. It will bubble up.
Dump the water and submerge the needle and cup into the warm water and pull the trigger.
spray onto a white napkin or white paper towel. If you don’t see any color on your napkin or
paper towel, your gun is clean.
After you clean it be sure to rinse it very well!

03/16/201705/08/2022

How to set up an Pinkiou-eyebrow tattoo machine to make perfect eyebrow? 10-0114(DSH-0004) 10-0081

This video show up how we set up an Pinkiou-eyebrow tattoo machine easily.

What You Need to Get Started:

Permanent Makeup Tattoo Machine
Permanent Makeup Tips – These guide your needles. They’re disposable.
Permanent Makeup Needles – These are special needles that can only be used with permanent
makeup machines.
Cosmetic Machine Tubes – This is the end of the machine; it’s the portion of the machine
that the needle and tip go in and slide over. If you have a steel tube, you can reuse it
by sterilizing it before each use. That can be time-consuming, though, so many people
prefer to use disposable plastic tips. If you have a busy shop, disposable tubes are the
way to go.
Pigments – You’ll need permanent makeup pigments, or inks, in a variety of colors so you
can do eyebrow, lip liner, and other cosmetic tattoos.
Basic Pinkiou-Permanent Makeup Machine Setup Instructions

Step 1: Purchase a Pinkiou-permanent makeup tattoo machine, permanent makeup needles,
cosmetic machine tubes, and permanent makeup tips.
Step 2: Take out your machine and a single card needle,tip.
Step 3: Remove all pieces from their sterilized packaging.
Step 4: Push the needle into the slot of your cosmetic tattoo machine.
Step 5: Push the needle all the way in, until it can’t go back any further.
Step6: Place the tip onto the tube, over the needle, and you’re ready!

02/26/201709/13/2018

Pinkiou-Microblade pen for tattooing your eyebrows. 10-0124

Pinkiou-Microblade pen for tatooing your eyebrows. Comes with two blades and a needle. They are single use applications, so everything stays sterile. Its easy to change the blades and has a […]

02/26/201708/12/2019

It will help you know Pinkiou Microblading Pen well. 10-0124

Pinkiou Microblading Pen with needles Permanent Makeup Pen Machine for Manual Eyebrow Tattoo (gold) The Microblading Pen is used with the paste pigment, which is the main tools for the eyebrow […]

02/20/201708/02/2019

How to properly use Pinkiou Eyebrow Ruler? 10-0179

Pinkiou Eyebrow ruler – perfect to find your perfect length eyebrow stencil!

Step 1:Find the goldden mean.
Step 2:Using wider aperture mesure distance between scleras.
Step 3:Place fourth part on divider and mark the beginnings of the eyebrow.
Step 4:Find arcade and stay parallel with ridge.
Step 5:Feel the bone to found a point 4
Step 6:Place the dividers as shown to found point 2.(Divider is flexible)
Step 7:Just flip divider to found point 5
Step 8:Pull skin,while skin is stretched draw the line in the canal of the arch for point6.Now
connect all points.
Step 9:Copy all the point on the left eyebrow.

Please click here to buy↓

♠Pinkiou Eyebrow Ruler Permanent Makeup Stencils Microblading Ratio Measure DIY Stencil For Eyebrows♣

02/07/201708/02/2019

Rapidly And Softly Hair Removal HS-3066

Pinkiou Rechargeable Lady Facial hair removal bikini shaver fashion modeling defeatherer Barber Electric Epilator，the perfect facial removal.

Use of This epilation, you can quickly and easily and effectively remove unwanted body hair.
Bring you unprecedented comfort painless plucking experience.
If you regularly (every 4 weeks) use of the product, your skin will be silky smooth while inhibiting hair growth by up to 50%.
Pinkiou Electric Epilator can rapidly rotating wheel grip shortest hair,and uprooted. So you can make your skin smooth for up to four weeks long, regeneration of hair becomes soft like hairs.

02/05/201707/31/2022

How to insert a nail drill bits to the nail drill machine 01-0028

This is a video about how to insert a nail drill bits to the Pinkiou Electric Nail Drill Manicure Kit 01-0028.

Lots of our client how have bought the Pinkiou electric Nail drill kit have met problem in install the nail drill bit.

From the design point, it is a little bit tricky. Since you need to keep pressing the button to screw on and screw off the front top holder.

if you don’t press the button, the front top holder will keep spinning which make lots of client feel it is unable to take off.

I hope this nail drill manual video will help you guys fix the problem. Please feel free to contact us via support@pinkiou.com if there is any other problem met.

1, press the button which is on front of the nail drill pen

2, screws out the tip holder of the nail drill pen

3, insert the nail drill bit to the nail drill pen

4, screws in the tip holder of the nail drill pen

5, release the button of the nail drill pen

how to put nail bit in drill

I hope that after watching this nail drill bit guide, it will help you to replace the metal nail drill bits yourself.

how to take off nail drill bit

it is the same procedure and just operate in reverse. Press the lock button and then loosen the top , then you can take off the nail drill bit easily.

SERVICE

ABOUT